This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
The following has been copied from the DSMLink forums. The original (courtesy of Ron Francis) may be found at in this user support forum thread. The text below has been updated to include 1g-specific info, as well as other minor edits.
Example: If LTFT-Lo is at a constant +5%, add +5% to the 50 Hz slider in the airflow table. If the LTFT-Lo is at a constant +12.5% and STFT is at +13%, add +26% to the 50 Hz slider in the airflow table. Repeat until you are happy.
Example: If STFT’s are bouncing between +14% and +16%, add +15% to the 150 Hz slider in the airflow table. Repeat until you are happy.
Example: If the fuel trim is at a constant +7%, add +7% to the 250 Hz slider in the airflow table. Repeat until you are happy.
Example: You make a pull and you get the following results:
!!!Notes