ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>ECMLink (V3) Laptop Application Changelog</h1> <div class="level1"> <p> <a href="http://www.ecmtuning.com/downloads.php" class="urlextern" title="http://www.ecmtuning.com/downloads.php" rel="nofollow">Downloads page</a> </p> </div> <h2>3.21.109 (11/22/2010)</h2> <div class="level2"> <ul> <li class="level1"> Extended global fuel adjustment range to accommodate 2150s on gasoline. </li> </ul> </div> <h2>3.21.108 (11/12/2010)</h2> <div class="level2"> <ul> <li class="level1"> Added "set values" helper to tables and lists where you can select a range of points and set all the values to a new value you specify.</li> <li class="level1"> Added "linear interpolation" helper to tables and lists where you can select a range of points (or a block of cells in a table) and have the application automatically fill in with end-to-end or corner-to-corner linear interpolation values. Helps to smooth out areas easier than doing it by hand.</li> <li class="level1"> Added "next tab" and "prev tab" accelerators. Pressing alt+left will move to the "previous" tab in the tab panel and alt+right will more to the "next" tab. Very handy when working on a laptop in the car where you'd rather not move the fingers away from the keyboard anymore than you have to. Makes switching between the datalog tab and the ECU configuration settings tabs much more convenient.</li> <li class="level1"> Change the way ECU configuration and datalog graph views handled "focus" changes when tabs switched. This keeps keyboard focus on the main table being edited when you switch between the datalog tab and an ECU configuration tab. For example, when editing the SD VE table and you switch back and forth between the datalog tab and the SD VE table. Keyboard focus used to leave the SD VE table so you always had to click back on the table to start editing again. This changes that behavior to you can just swap back and forth and edit constantly without moving the hands from the keyboard.</li> <li class="level1"> Added AEM model number (30-2301) to the "AEM wideband" alias item to help differentiate it from all the other AEM WB routines out there.</li> <li class="level1"> Fixed a few direct access display bugs that caused some goofy behavior on a few systems. Sometimes the DA tab would come up empty, for example, and you had to close the tab and open it again to fix it.</li> <li class="level1"> Fixed how the WGS (boost control) tab handled the "enabled" state to allow for setups where boost control was being used without a boost sensor connected. It could be done before, but now it's a lot easier without any goofy workarounds.</li> <li class="level1"> Added new "toggle last saved" button to the ECU Config area that lets you toggle your current tab view between what you're currently editing and the last saved values. This is REALLY useful when editing SD VE tables, for example. Particularly when working with helper-suggested adjustments. It's handy to see exactly how much of an adjustment was suggested and in which cells so you can smooth around those areas appropriately.</li> <li class="level1"> Changed how the "show stock values" button works in direct access to be more intuitive. Now, when you press "show stock values", you can just immediately hit "save to ecu" to copy those values into the ECU instead of having to do an explicit "use stock values" operation first (which was a little confusing).</li> </ul> </div> <h2>3.21.40 (09/08/2010)</h2> <div class="level2"> <ul> <li class="level1"> Added "set values" and "zero values" dialog box to the boost control tables. Will probably add this same function to other tables later.</li> <li class="level1"> Exposed new fields on the antilag control tab to help guys using this function on automatics. The new fields allow the user to define the throttle position and hi/low speed points that activate ALS and control when launch logic vs. clutch switch logic is used.</li> </ul> </div> <h2>3.20.254 (08/02/2010)</h2> <div class="level2"> <ul> <li class="level1"> Minor release just to update the help files with boost control pages.</li> </ul> </div> <h2>3.20.252 (07/28/2010)</h2> <div class="level2"> <ul> <li class="level1"> Added support to the application for 1G boost control logic soon to be released as a firmware upgrade</li> <li class="level1"> Added PacketInt log item to show the time between data packets received from the ECU. This is useful in identifying areas of a log file where you may have saved an update to the ECU as the log file was being captured.</li> <li class="level1"> Added the ability to open firmware request files directly in the application. This provides additional information about the request file and then opens both the settings and direct access tabs with data from that request file.</li> </ul> </div> <h2>3.20.245 (07/22/2010)</h2> <div class="level2"> <ul> <li class="level1"> Added support to the application for new boost control logic to be released soon for the full V3 package.</li> <li class="level1"> Added new adjustment tool for use with boost control dial-in.</li> <li class="level1"> Added new "ECUBoost" log item to display the ECU's idea of boost based on MAP sensor configuration in the ECU Inputs tab.</li> <li class="level1"> Changed SDRatio so that the <a href="/wiki/doku.php?id=sdveadjsdratio" class="wikilink1" title="sdveadjsdratio">SDRatio adjustment tool</a> uses displacement directly off the SDVE tab to configure SDRatio's displacement property first before doing any VE calculations.</li> <li class="level1"> Correcting the conversion from inHg to mmHg when kg/cm2 selected for display units on boost</li> <li class="level1"> Adjusted mileage estimation to more correctly handle throttle lift conditions (where no fuel flow results in crazy mileage numbers).</li> <li class="level1"> Adjusted "copy table to clipboard" operation to work better on Mac platforms when pasted into Excel.</li> <li class="level1"> Renamed A/C Comp and A/C Comp Pin to indicate more clearly what these values represent. They are now named A/C rqst and A/C rqst Pin because they are really the requested state from the A/C computer of the A/C compressor and not the actual state.</li> <li class="level1"> Updated AEM WB display routines to properly support AEM's new sensor.</li> </ul> </div> <h2>3.20.174 (05/21/2010)</h2> <div class="level2"> <ul> <li class="level1"> Major new functionality support in Fuel tab. This version has support for the new individual deadtimes soon to be released as a firmware upgrade.</li> <li class="level1"> Also added support for microsecond deadtime adjustments. Like the individual deadtimes support, none of this will appear on your screen until you have upgraded your firmware.</li> <li class="level1"> Drag and Drop tab support (tab re-ordering).</li> <li class="level1"> Updated support for the new and improved AEM 30-5130 WB unit.</li> <li class="level1"> This version changes the default structure of direct access and firmware request files. Old applications (prior to 3.20.174) will not be able to open the new versions of these files. This application (3.20.174 and beyond) can still open old files, though. It's just old applications that can't open new files.</li> <li class="level1"> Allows zooming while live datalog stream is in progress. This is useful sometimes even though it sounds a little strange at first.</li> <li class="level1"> Updated time label in the datalog graph view to retain selection width information as you change tab views.</li> </ul> </div> <h2>3.20.115 (03/19/2010)</h2> <div class="level2"> <ul> <li class="level1"> Fixed bug with MAFComp tab on V3Lite which prevented the tab from displaying anything in certain combinations of ECU type and Base MAF selections.</li> <li class="level1"> Added support for the new AEM Analog wideband gauge/sensor combination. This is AEM model number 30-5130 and represents a much nicer model than any previous AEM kit. This kit might actually be usable…</li> </ul> </div> <h2>3.20.107 (03/16/2010)</h2> <div class="level2"> <ul> <li class="level1"> Minor tweak to the global fuel estimate tool to use 42.6 psi as stock base pressure on 2Gs and EVO1-3s</li> <li class="level1"> When a user selects the "remove from display-all" option, we now also remove the item from the legend</li> <li class="level1"> Added support for new V3Lite functions (fuel, timing and MAF comp tabs)</li> </ul> </div> <h2>3.20.52 (01/20/2010)</h2> <div class="level2"> <ul> <li class="level1"> Removed "undefined" from list of available captured values.</li> <li class="level1"> Added support for V3Lite on 1G and 2G DSMs.</li> </ul> </div> <h2>3.19.139 (12/22/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added new load scale feature to allow for scaling of the load axis for engine displacement larger than 2 liter. This feature could also be used to increase the maximum load row of the main timing and fuel tables inside the ECU.</li> <li class="level1"> Native support for Windows 7 (without the need for compatibility mode).</li> <li class="level1"> Merged various logging values into one so that you can view more information using less bandwidth. This effectively increases logging rate! You will need to upgrade your ECU firmware to v3.19.139 as well in order to get this new functionality.</li> <li class="level1"> Added support for new AFRatioEst display item that displays the ECU’s target A/F ratio in a way that’s more accurate and much easier to use. You will need to upgrade your ECU firmware to v3.19.139 as well in order to get this new functionality.</li> <li class="level1"> Change reflash logic to be more reliable. Although we’ve not had any problems with our previous implementation, the new version is even more failsafe. This does mean firmware upgrades will take a bit longer when you flash the firmware to your ECU, but the enhanced reliability should be a comfort to you.</li> <li class="level1"> Change allowable value limits for all the custom “linear” routines.</li> </ul> </div> <h2>3.19.116 (12/03/2009)</h2> <div class="level2"> <ul> <li class="level1"> Changed "use as default list" option behavior with displayed values to work more intuitively.</li> <li class="level1"> Added a user-defined option for MAP scaling to use with speed density operation.</li> <li class="level1"> Fixed minor bug in copy/paste table functionality when pasting data of mismatching column size.</li> <li class="level1"> Adding application warning when connecting to an ECU with firmware that's newer than the application.</li> <li class="level1"> Added initial support for a much easier version of AFRatioEst to be released in a future firmware update.</li> <li class="level1"> Added application support for relocatable locations inside the ECU. This is needed for the AFRatioEst change as well as a few others planned for future release.</li> <li class="level1"> Updated a few help files pages that were missing details on recent feature additions.</li> </ul> </div> <h2>3.19.70 (10/15/2009)</h2> <div class="level2"> <ul> <li class="level1"> Fixed deadlock that could occur when changing parameters for certain display items</li> <li class="level1"> Fixed issue with 64-bit "AMD" Linux systems</li> <li class="level1"> Fixed bug with using LinearBoost and LinearWideband at the same time (they used each other's display configuration items).</li> <li class="level1"> Added LinearFuelPress item for logging user-defined fuel pressure sensors.</li> <li class="level1"> Added "always on top" and "opacity" items for detached table views. This allows the user to keep the timing table on top of the graph window while scrolling through the graph. Adjustable opacity lets the graph window "show through" the detached table view even with "always on top" is set.</li> <li class="level1"> <b>NOTE:</b> To use the opacity function from above, you MUST install a full release of at least 3.19.40 before installing this update. The full 3.19.40 release includes a new Java VM that provides the required opacity functionality. Without this, you simply won't get opacity functionality on your detached windows.</li> <li class="level1"> Added "show all available" function to automatically display everything possible from a given datalog. You can remove items from the "auto-all" list by unchecking the "include in display all" checkbox for each item you want to ignore.</li> </ul> </div> <h2>3.19.64 (10/6/2009)</h2> <div class="level2"> <ul> <li class="level1"> Fixed bug in Linux installer that could have prevented the application from starting up on certain systems.</li> <li class="level1"> Fixed graph rendering optimization bug that caused artifacts in certain datalog items when viewed with a high zoom factor.</li> <li class="level1"> Changed Ctrl-Q (Toggle hide-all) so that the previous and current "hide state" was tracked separate from any current display item state. This makes the function behave properly when your first (upper left) display item is hidden from display by default.</li> </ul> </div> <h2>3.19.60 (9/30/2009)</h2> <div class="level2"> <ul> <li class="level1"> Lots of optimization on graph rendering logic.</li> <li class="level1"> Added dashed line and thick line options for each display item. Be care with the dashed line option. This is an "expensive" operation in terms of CPU usage. Don't use this option for values that change frequently (like front O2).</li> <li class="level1"> Changed Ctrl-Q (Toggle hide-all) so that it toggles between hide-all and show-default instead of hide-all and show-all. This seems to be a more natural usage scenario.</li> <li class="level1"> Added support for Mac OS X 10.6 (Snow Leopard). You *must* <a href="http://www.ecmtuning.com/downloads/drivers/FTDIUSBSerialDriver_v2_2_14.dmg" class="urlextern" title="http://www.ecmtuning.com/downloads/drivers/FTDIUSBSerialDriver_v2_2_14.dmg" rel="nofollow">update the cable driver</a>, however. Do that first.</li> </ul> </div> <h2>3.19.49 (9/17/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added support for logging LoadFactor rather than factory load index to EVO1-3 ECUs</li> <li class="level1"> Updated support for EVO1-3 record structures to work with new extended timing and fuel tables</li> <li class="level1"> Added new buttons to bottom of graph display for quicker access to embedded ECU Config and Direct Access data while viewing datalogs</li> <li class="level1"> Fixed bogus error message when trying to run dial-in helpers under MacOS without first having the ECU Config tab open.</li> </ul> </div> <h2>3.19.40 (9/10/2009)</h2> <div class="level2"> <ul> <li class="level1"> Fixed up/down arrow issue with ALS timing field</li> <li class="level1"> Fixed RPM indices on MAFClamp table (they now show the appropriate RPM indices based on ECU capabilities)</li> <li class="level1"> Increased selection contrast on SD VE table to match direct access</li> <li class="level1"> Expanded help docs related to IdleAir clamp function</li> <li class="level1"> Added support for new "disable MAF Comp while running in SD mode" checkbox (requires matching <a href="http://www.ecmtuning.com/apps/firmwareupgrade" class="urlextern" title="http://www.ecmtuning.com/apps/firmwareupgrade" rel="nofollow">firmware upgrade</a> to access this function)</li> <li class="level1"> Changed Java VM memory options to allow for more simultaneous large files to be opened</li> <li class="level1"> Changed default (bundled) Java VM version. To get this, however, you must install a "full" release. The "update" does not include a bundled JVM. This does not fix any known issues, so it's not really that critical. </li> </ul> </div> <h2>3.19.20 (8/22/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added fast idle ISC tables for EVO1-3 direct access</li> <li class="level1"> Display an appropriate error when we get no response from reflash operation</li> <li class="level1"> Fixed 2 bugs related to real-time changes while datalogging. You should be able to use the instant "save as changes are made" option while logging.</li> <li class="level1"> Fixed bug related to optimized save of small changes to large tables that was actually dropping updates at the end of the block.</li> </ul> </div> <h2>3.19.6 (8/7/2009)</h2> <div class="level2"> <ul> <li class="level1"> Increased contrast on selection highlighting with direct access tables</li> </ul> </div> <h2>3.19.3 (8/3/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added logic to speed up large table updates (like the speed density table)</li> <li class="level1"> Corrected spelling of Celsius <img src="/wiki/lib/images/smileys/icon_eek.gif" class="icon" alt="8-O" /></li> <li class="level1"> Added more EVO1-3 support functions, including speed density</li> <li class="level1"> Added experimental "save to ECU as changes are made" button. USE WITH CARE! This can act flaky if you are making changes while datalogging at the same time. We'll either fix that behavior or remove this function, depending on the level of interest and testing results.</li> </ul> </div> <h2>3.18.239 (7/15/2009)</h2> <div class="level2"> <ul> <li class="level1"> Updated linear wideband property names to indicate lambda instead of boost</li> <li class="level1"> Enabled "raw" and "hex" views to direct access tables</li> <li class="level1"> First release of EVO1-3 support added to application</li> </ul> </div> <h2>3.18.230 (7/6/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added support for the <a href="http://www.omnipowerusa.com/product.asp?P_ID=158" class="urlextern" title="http://www.omnipowerusa.com/product.asp?P_ID=158" rel="nofollow">Omni Power</a> 3 and 4-bar sensors. These can be datalogged, used for speed density operation or used for MAFClamp functions.</li> </ul> </div> <h2>3.18.205 (6/13/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added initial speed density documentation</li> <li class="level1"> Corrected glitch in AEMWB Gauge R1 mapping at 0.62v and 4.52v</li> </ul> </div> <h2>3.18.196 (6/5/2009)</h2> <div class="level2"> <ul> <li class="level1"> Fixed bug in detached-tables when minimizing and then restoring the application's main window</li> <li class="level1"> Corrected inversion bug in SD table update wizard</li> <li class="level1"> Added "tip in" correction table to direct access</li> </ul> </div> <h2>3.18.182 (5/24/2009)</h2> <div class="level2"> <ul> <li class="level1"> Adjusted GM 3-bar display routine to precisely match Delphi specification. This was actually a VERY minor change.</li> <li class="level1"> Made some design changes to support new device "plug in" modules coming later.</li> <li class="level1"> Made reboot/reconnect after direct access update much faster.</li> <li class="level1"> Added framework to application to support new SD features coming soon.</li> <li class="level1"> Fixed minor bugs in direct access display (like making color maps optional)</li> </ul> </div> <h2>3.18.116 (3/20/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added function to allow live cell highlighting of various direct access tables</li> <li class="level1"> Added function to detach various direct access tables from the application as floating windows.</li> <li class="level1"> Added ability to individually color graph legend items.</li> <li class="level1"> Slight change to BoostEst definition that may cause this item to disappear from your graph legend. Simply add it back using the Display Values dialog box if this happens.</li> <li class="level1"> Small adjustment to LC1WB display routine to improve accuracy</li> <li class="level1"> Added application version string to About box</li> <li class="level1"> Added a few help file pages for functions that will be available in future firmware upgrades. You can ignore these until the firmware upgrade is available. These pages include Speed Density, AuxMaps, and EGR.</li> </ul> </div> <h2>3.18.44 (1/12/2009)</h2> <div class="level2"> <ul> <li class="level1"> Improved the MAF adjustment helper - <a href="/wiki/doku.php?id=v3mafadjcombft" class="wikilink1" title="v3mafadjcombft">MAFComp Adjust (CombinedFT)</a> </li> <li class="level1"> Added support for estimated HP and Torque for V1/V2 ECUs</li> <li class="level1"> Fixed bug in datalog export function where the running timestamp was being reported as RPM</li> </ul> </div> <h2>3.18.33 (1/1/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added TPS adjustment helper - <a href="/wiki/doku.php?id=v3tpsadj" class="wikilink1" title="v3tpsadj">TPS Adjust</a></li> <li class="level1"> Added support for V2 ECUs and the <a href="/wiki/doku.php?id=v3mafadjcombft" class="wikilink1" title="v3mafadjcombft">MAFComp Adjust (CombinedFT)</a> </li> </ul> </div> <h2>3.17.158 (12/30/2008)</h2> <div class="level2"> <ul> <li class="level1"> Fixed bug with reset LTFT function when used with a DSMLink (V2) ECU</li> <li class="level1"> Added V3 MAF Compensation global scalar "helper" to help auto center the MAF compensation table - <a href="/wiki/doku.php?id=v3mafadjcombft" class="wikilink1" title="v3mafadjcombft">MAF Adj: CombinedFT</a></li> <li class="level1"> Tweaked fuel calculator to provide an initial estimate of injector size and to allow for use of calculated global fuel adjustment</li> <li class="level1"> Added View menu items to edit ECU Config and DirectAccess data embedded in a datalog more easily</li> </ul> </div> <h2>3.17.154 (12/26/2008)</h2> <div class="level2"> <ul> <li class="level1"> Changed version number in about box (may require re-acceptance of license agreement)</li> <li class="level1"> Added some details to help file</li> <li class="level1"> Added reset of long term fuel trim ECU menu item</li> <li class="level1"> Added MAF adjustment "wizard" based on CombinedFT</li> <li class="level1"> Misc: added ClosedLoop, fixed 1G EGR log item, added 0.5 min-clip to AEM 3.5 and AEM 5-bar, added details to some direct access tabs</li> </ul> </div> <h2>3.17.142 (12/15/2008)</h2> <div class="level2"> <ul> <li class="level1"> Initial release</li> </ul> </div>